Passat Variant


VW Golf  All Wheel Drive Control Module    J492

VW Golf All Wheel Drive Control Module J492

All Wheel Drive Control Module J492 The instruction is suitable for the following models: Golf,Passat,Passat Variant Special tools and workshop equipment required Torque Wrench 1331 5-50Nm VAG1331 Shop Crane - Drip Tray VAS6208 ..

VW Golf  All Wheel Drive Control Module    J492  - Overview, Golf from MY 2004 and Passat from MY 2006

VW Golf All Wheel Drive Control Module J492 - Overview, Golf from MY 2004 and Passat from MY 2006

All Wheel Drive Control Module J492 - Overview, Golf from MY 2004 and Passat from MY 2006 The instruction is suitable for the following models: Golf,Passat,Passat Variant All Wheel Drive Control Module J492 Is calibrated with Haldex Clutch Control Valve N373 item 4 Item Always replace together with the valve item 4 Item Removing. Refer to Go to article “ All Wheel Drive Control Module J492 , Removing ” The instruction is suitable for the following..

VW Golf  Codes, Transmission Allocation and Capacities, Golf from MY 2004 and Passat from MY 2006

VW Golf Codes, Transmission Allocation and Capacities, Golf from MY 2004 and Passat from MY 2006

Codes, Transmission Allocation and Capacities, Golf from MY 2004 and Passat from MY 2006 The instruction is suitable for the following models: Golf,Passat,Passat Variant Rear Final Drive 0AV 01Z Codes JJN KJS KJQ Part Number Refer to the Parts Catalog. Refer to the Parts Catalog. Refer to the Parts Catalog. Manufactured from through 05/2007 11/2007 05/2007 Allocation Type Golf “R32” NAR Golf “R32” NAR Passat “R36” and Passat Wagon “R36” Engine 3.2L - 184 kWV6 3.2L -..

VW Golf  Driveshaft, Tensioning with  Gearbox Support Stop Plate     T10108/1

VW Golf Driveshaft, Tensioning with Gearbox Support Stop Plate T10108/1

Driveshaft, Tensioning with Gearbox Support Stop Plate T10108/1 The instruction is suitable for the following models: Golf,Passat,Passat Variant Secure the Gearbox Support Stop Plate T10108/1 to driveshaft tube flexible disc. Place the nuts B between the Gearbox Support Stop Plate T10108/1 and flexible disc on the bolts A . A M10 x 70 Bolt with Nut B M12 Nut ..

VW Golf  Flange Shaft Seals, Replacing, Rear Final Drive 01Z

VW Golf Flange Shaft Seals, Replacing, Rear Final Drive 01Z

Flange Shaft Seals, Replacing, Rear Final Drive 01Z The instruction is suitable for the following models: Golf,Passat,Passat Variant Special tools and workshop equipment required Puller - Seal Lever VW681 Puller - Flanged Shaft T10037 Seal Installer - Flange Shaft T10049 Shop Crane - Drip Tray VAS6208 Sealing Grease G 052 128 A1 Note Do not remove the final drive for this. The description applies to both sides. Removing and Flange Shaft SealPerform the fol..

VW Golf  Flange Shaft Seals, Replacing, Rear Final Drive 0AV

VW Golf Flange Shaft Seals, Replacing, Rear Final Drive 0AV

Flange Shaft Seals, Replacing, Rear Final Drive 0AV The instruction is suitable for the following models: Golf,Passat,Passat Variant Special tools and workshop equipment required Puller - Seal Lever VW681 Puller - Flanged Shaft T10037 Seal Installer - Flange Shaft T10049 Shop Crane - Drip Tray VAS6208 Sealing Grease G 052 128 A1 Removing and Flange Shaft SealPerform the following: Remove the drive axle. Refer to Suspension, Wheels, Steering Rep. Gr. 42 Drive..

VW Golf  Flexible Disc with Vibration Damper, Installation Location

VW Golf Flexible Disc with Vibration Damper, Installation Location

Flexible Disc with Vibration Damper, Installation Location The instruction is suitable for the following models: Golf,Passat,Passat Variant The brace on the outer diameter arrows faces away from the driveshaft tube...

VW Golf  Haldex Clutch Pump    V181

VW Golf Haldex Clutch Pump V181

Haldex Clutch Pump V181 The instruction is suitable for the following models: Golf,Passat,Passat Variant Special tools and workshop equipment required Torque Wrench 1331 5-50Nm VAG1331 Shop Crane - Drip Tray VAS6208 ..

VW Golf  Overview - Haldex Clutch (Generation II), Golf from MY 2004 and Passat from MY 2006

VW Golf Overview - Haldex Clutch (Generation II), Golf from MY 2004 and Passat from MY 2006

Overview - Haldex Clutch (Generation II), Golf from MY 2004 and Passat from MY 2006 The instruction is suitable for the following models: Golf,Passat,Passat Variant Multi-Disc Clutch Overview. Refer to Fig.“Clutch Plate Assembly” Removing and Installing. Refer to Go to article “ Haldex Clutch Grooved Ball Bearing, Replacing ” The instruction is suitable for the following models: Golf,Passat,Passat Variant . Bolts 6 Nm Haldex Clutch Pump V181 Removing and Installing. ..

VW Golf Engine: (CBRA,BWS,CDLC,CDLF,CRZA,CDLG) Adjusting Shims

VW Golf Engine: (CBRA,BWS,CDLC,CDLF,CRZA,CDLG) Adjusting Shims

Adjusting Shims The instruction is suitable for the following models: Golf,Passat,Passat Variant,Golf Measure the shims at several locations with a micrometer caliper. Tolerance variations make it lisible to find the exact shim thickness required. Check for burrs and damage. Only install perfect shims. ..




Showing 1 to 10 of 483 (49 Pages)