VW Brake System Vacuum Pump V192

Brake System Vacuum Pump V192


The instruction is suitable for the following models:

Only on gasoline vehicles with a DSG® transmission and without a hydraulic brake booster

Component location of brake vacuum pump is located on DSG® transmission at front in direction of travel.

It is not lisible to service the Brake System Vacuum Pump . If there is a malfunction, replace Brake System Vacuum Pump V192 .

Removing

Note The illustrations show the brake vacuum pump horizontally. It is installed vertically on other engine/transmission combinations. Disconnect vacuum hose 1 from Brake System Vacuum Pump .
Chassis|Brake System|Hydraulic Components|Removal and Installation|Brake System Vacuum Pump V192
Disconnect harness connector 2 for Brake System Vacuum Pump . Remove remaining harness connectors and wires from bracket 3 . Remove the arrows bracket 3 with Brake System Vacuum Pump . Then unscrew arrows Brake System Vacuum Pump 1 from bracket 2 .
Chassis|Brake System|Hydraulic Components|Removal and Installation|Brake System Vacuum Pump V192

Installing

Install in reverse order of removal.

Tightening specifications:

Brake System Vacuum Pump to bracket 8 Nm

Bracket to automatic transmission 25 Nm