VW Air Quality Sensor G238

Air Quality Sensor G238


The instruction is suitable for the following models:

Removing

Note The Air Quality Sensor G238 is located at the front of the plenum chamber on the left side (in direction of travel) and it is installed on the Fresh Air Intake Duct Temperature Sensor G89 . The Air Quality Sensor G238 contains a highly sensitive electronic component that can be damaged if it comes in direct contact with solvents, fuels or chemicals. Do not install a sensor that has been kept, for example, in a tool box. Do not store removed sensors in areas where they can come into contact with solvents, fuels and certain chemical comliitions (fluids or vapors). Remove the plenum chamber cover. Press the retaining straps arrows for the fresh air intake duct temperature sensor A together and remove the air quality sensor B .
Heating, Ventilation & Air Conditioning|Heating, Ventilation and Air Conditioning|Air Conditioning|Removal and Installation|Additional Components for Control and Regulation
Disconnect the connector.

Installing

Install in reverse order of removal.